Mini DIY Polishing Cutting Buddha Beads Woodworking Lathe
Type: Miniature lathe. Length: 31 cm / 12 inch
Power: 100W. Voltage: DC12-24V
Applicable materials: lobular red sandalwood, pear, clams and so on
Micro-multi-function lathe, small and multi-functional, convenient. High precision, stability, low noise. Acrylic dust cover, super convection cooling holes
1. Drill holes at both ends of the wood. Put up, behind the shelf on the screw, do not be too tight. Find something knock on the shelf.
2. When the beginning of the round wooden round when the slower. According to the size of the car beads, on both sides of the designated mark. Car beads knife from the Buddha beads to the center to go.
3. After the outline of the outline, and then repair with a repair device.
Note: Buddha beads punch, push forward directly on the line. If you do not wear on the hand holding.
1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2.The speed can be adjusted in 0-8000R, cut wood should not exceed 4000, grinding can use higher speed.
3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4.If not a cylinder, the speed should be reduced.
5.Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.
7.If you do not really understand the operation, it is best to consult a professional person.
1 x miniature lathe
1 x Threaded
3 x hexagonal fixing pin 1.5mm, 2.0mm, 2.5mm
6 x Carving knife
Note:Not include power supply.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.